Configuring Netgear AP in simple steps

Configuring Netgear Access Points in simple steps
NETGEAR AP USED: WG602v4

Step 1- IP ADDRESS
Configure a static
IP Address of 192.168.0.210
Subnet mask 255.255.255.0
default gateway 192.168.0.227

Step 2-Connection
Connect the Wireless AP to your computer with the AP Switched on

Step 3- Browser
enter 192.168.0.227 (IP addrress of AP) in the web browser with admin as the username and password as the password

Step 4-Changing IP Adresss
if you wish to change the IP address:
. setup -> IP settings -> disable radio button for DHCP Client -> enter static IP Address range
Step 5- Wireless Setup
under Setup -> Wireless Settings, changed the required parameters and Apply

Step 6 – WiFi Security
Setup -> Security Settings

All explanations are on the right in the web browser

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s