OSPF Configuration

SETUP
R0(192.168.1.2) – R1(192.168.1.1 & 192.168.2.1) – R2(192.168.2.2)

R2(config)#router ospf 1
R2(config-router)#network 192.168.2.0 0.0.0.255 area 1
R2(config-router)#

R1(config)#router ospf 1
R1(config-router)#network 192.168.2.0 0.0.0.255 are 1
R1(config-router)#network 192.168.1.0 0.0.0.255 area 0
R1(config-router)#
*Mar  1 00:12:14.395: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.2.2 on Serial0/1 fr
om LOADING to FULL, Loading Done

R0(config)#router ospf 1
R0(config-router)#network 192.168.1.0 0.0.0.255 area 0
R0(config-router)#do ping 192.168.2.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/20/32 ms
R0(config-router)#

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s