OSPF & EIGRP Configuration

On Saturday i decided to play around with GNS3 was quite impressed with its simplicity, during the course i thought id do some OSPF and EIGRP Configs, here they are;

SETUP
Ro(192.168.1.2 -OSPF) – R1(192.168.1.1 -OSPF& 192.168.2.1-EIGRP) – R2(192.168.2.2 -EIGRP)

R2(config)#router eigrp 1
R2(config-router)#network 192.168.2.0
R2(config-router)#

R1(config-router)#router eigrp 1
R1(config-router)#network 192.168.1.0
R1(config-router)#network 192.168.2.0
R1(config)#router ospf 1
R1(config-router)#network 192.168.2.0 0.0.0.255 are 1
R1(config-router)#network 192.168.1.0 0.0.0.255 area 0
R1(config-router)#

R0(config)#router ospf 1
R0(config-router)#network 192.168.1.0 0.0.0.255 area 0
R0(config-router)#do ping 192.168.2.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/20/32 ms
R0(config-router)#

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s